|Collaboration That Works

InFocus ScreenPlay SP8602 Home Theatre Projector

Part Number: SP8602

Compare with other products

Native Aspect Ratio16x9
Lumens (Eco/High)1100/1300
Closed CaptioningYes
Audible Noise (Eco/High, dBA)28 dB/29 dB
Keystone± 30ºV/H
Lamp Hours (Eco/High)2000/2500
ConnectionsVGA, HDMI, Component, Composite, S-Video
Image Offset5
Lens Shift: Horz (min/max)15%/15%
Lens Shift: Vert (min/max)5%/30%
Throw Ratio2.279~1.494
Product Dimensions HxWxD21.25in x 14.25in x 7in (540mm x 362mm x 178mm)
Shipping Weight(lbs/kg)24.1/11.0
Shipping Dimensions HxWxD19.5in x 27.5in x 12.32in (495mm x 699mm x 313mm)
Power consumption (Max, Watts)375
Product Warranty2 Years
Lamp Warranty6 Months
Accessory Warranty90 Days
ApprovalsUL60950-1/cUL (USA and Canada), FCC Part 15, Class B (USA), CE (Europe), S-Mark (Argentina), GOST (Russia), KC (Korea),Safety Mark (Singapore), CCC, CECP (China), C-Tick (Australia/NZ)


  • Added Always-On Functions to the projector Setup menu to allow for customer base to configure their SP8602 projector to operate through wired IR control. Example use in this configuration: If the projector is mounted in a hush box with a wired IR. Previous versions of projector firmware would not allow for Power On when in the standby (powered down) state. With the new Always On Functions set to the On state the Power On in this configuration allows the power up control to function from the Standby state.
  • Some installations running HDMI 1080p through long cable runs or CAT5/6 extenders cannot support HDMI Deep Color due to the high bandwidth requirements. In these cases we have added a new option in the Status and Service Menu to allow the installer to configure this Deep Color option either on or off (On by default).
    Additionally, we have added another HDMI option setting in this same section HDMI long cable that change the equalization setting on the HDMI receivers. Default is Long Cable enabled. This may only need to be changed back for HDMI cable lengths 3 meters or less dependent on the installation and cable quality utilized.

  • Resolves potential Menu/Remote Lock-out requiring a power cycle
  • Resolves image tearing in 1080p60 for Overscan and Letterbox settings
  • Improves DynamicBlack sensitivity creating smoother transitions between scenes

  • Fixes and adjustments applied to Letterbox aspect ratio on HDMI sources.
  • Resolved issue with video tearing in 1080p 24f single images with SplitScreen turned off.
  • Resolved issue with green in 1080i test images. (AVS test disc issue.).
  • Image improvements in SplitScreen mode.
  • Added a captioned test pattern of "Setting up SplitScreen" when enabling SplitScreen Mode for a smoother transition.
  • Motion Smoothing is set to OFF by default.
  • The DynamicBlack/Iris is set to 100% by default.
  • Added support for longer HDMI cabling; practical use is dependant on cable and source quality.